Damp Guard 2K

Lock-n-seal Damp Guard 2k is a 2-part polymer-modified flexible cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry part is mixed with acrylic-modified emulsion and applied according to direction, the cured product will become a tough, flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface.

Area of Application:

•  Concrete foundations, basements walls and lift pits.
•  Swimming pools, water tanks and reservoirs.
•  Concealed roofs, parking decks, bathroom, toilet, kitchen, balconies and planters.
•  Any other concrete, cement or masonry surface subject to damage from moisture.
•  Roofs and exterior masonry surfaces

Features & Benefits:

•  Quick drying
•  Easily applied by brush or trowel
•  Flexible
•  Excellent adhesion to concrete and masonry substrates
•  Non toxic substances
•  Environmentally friendly – free Volatile Organic Compound (VOC)
•  Can be applied on damp surface.
•  Excellent waterproofing property – No leakage up to 10 m. hydrostatic pressure.

Method of Application:

1. Surface Preparation:

•  Allow new concrete and masonry substrate to fully cure prior application.
•  All surfaces must be free from oil, grease, wax, dirt or any other form of foreign matter which might affect adhesion. Spalled Concrete must be sound before applied.
•  Substrate should be reach a “Saturated Surface Dry” (SSD) condition (damp, without standing water).

2. Mixing:

•  Using Portland mechanical mixer, slowly add Powder part to Liquid part in a clean container until a smooth and homogenous slurry mixture is achieved.
•  Allow the mixed slurry to stand for 5-10 minutes for releasing air-trapped during the mixing prior to application. Mixing material must be use within recommend pot life.

•  Packaging: 3 kgs, 6 kgs, 15 kgs
•  Shelf Life: 12 Months in the original packing